- Make sure you have bought the correct memory that is compatible with your specific motherboard.
- Maybe one slot is faulty. Try a different slot into your motherboard.
- The chips should be in place and sturdy without being able to move. The clips should be holding the RAM chips down.
The more the RAM in your computer, the faster it will operate. There are 6 steps to be followed as you how to change the RAM in your desktop computer.
RAM or ‘random access memory’ can be referred as a memory format that is used in both desktop and laptop computers that helps data to be transferred from your hard drive and processor. RAM can be related to a middleman who increases the data transfer speeds. The more the RAM that is prevalent in your desktop or laptop computer, the faster it will operate. You need to replace the RAM memory in order to repair a faulty RAM or to upgrade your computer so that it works faster.
How do you change the Desktop RAM ?
Step 1: First of all unplug all the connections so that there is no static charge damage to the machine. To perform the upgrade and get access to the motherboard will depend on your PC model. Check the computer manual to gain an access to the ram modules by removing your desktop computer casing.
Step 2: It is highly advisable to clean up the internal parts of the PC by using a compressed air can for the unit and a cotton bud to clean the internal fans. Cleaning the dust will ensure that the PC runs smoothly with its new upgrade.
Step 3: Locate the RAM module slots. These slots are normally located close to the heat sink with a small fan. These are available in 1 pair or 2 pairs of 2. You can easily identify these slots by their narrow width and small clips on either side.
Step 4: Now it is time to install the RAM. Once the RAM slots have been taken and other things removed, its time to install your RAM chips. Lower the small clips on either side and the chip will pop out to be removed.
Step 5: Make sure that the RAM chip is aligned properly. The clips should be unlocked in the down position before you continue to place the chips in the module holes. The most preferred way is to insert one side first till you hear a small click. Then apply pressure on the other side till you hear the second clip lock.
Step 6: Slowly put your desktop PC back together. Connect all the accessories and all the power connections. Turn on your desktop PC and it starts recognizing the new addition. Continue to boot into windows.
You need to double check a few things if you find that the computer doesn’t boot